Using CIRCLY 6.0 over a network

CIRCLY 6.0 can be run over a network, in the sense that the data files can stored and shared on a remote server or workstation.

For the following procedure to work, it is assumed that the CIRCLY 6.0 data files are already installed on the server – (the core data files are *.cls and *.cmdb).

To set up a client/workstation, follow these steps on the client:

1. Open Windows Explorer.

2. In Windows Explorer, open “My Network Places” and navigate to the server, then to the drive where the CIRCLY data is stored.

3. Now start CIRCLY on the client.

Click ToolOptions.

If for example the CIRCLY data files are installed in the folder “C:Users\Public\Documents\Mincad Systems\CIRCLY6\data” on the server, type in the following string:

\ServerName\C\Users\PublicDocuments\Mincad Systems\CIRCLY6data

You should now be able to run CIRCLY on the client, while all data files are stored on the server.

Note: The Hardware Lock must be plugged into the client PC to successfully run CIRCLY analyses.